BEng (Hons) Electronic and Computer Engineering Bachelor's degree at the University of Kent
BEng (Hons) Electronic and Computer Engineering at University of Kent. You'll move between fundamental engineering principles and hands-on technical work, developing the technical literacy needed in contemporary technology roles.
About this course
Combine electronics and computing with a BEng (Hons) in Electronic and Computer Engineering at the University of Kent. Develop expertise in circuit design, embedded systems, and programming, preparing for a career in tech, engineering, and innovation. Apply now! From the provider’s course page.
BEng (Hons) Electronic and Computer Engineering is a Bachelor's degree (BEng (Hons)) at the University of Kent, based in Canterbury. It runs 3 years, studied full-time.
For Electrical and electronic engineering graduates from this provider, 95% were in work or further study 15 months after graduating, 65% in highly skilled roles, typical earnings around £32,000. (HESA Graduate Outcomes / LEO, via Discover Uni.)
For the typical curriculum, specialisations, career paths and graduate earnings for Engineering, see the sections below.
Course evidence score
The arithmetic mean of the official measures available for this course: NSS satisfaction, graduate activity and continuation.
Published threshold met NSS publication requires sufficient responses; small differences are not a rank. NSS mean of 7 published themes (Discover Uni snapshot 2026-06-21)
Moderate evidence Published sample: 30; avoid reading small differences as meaningful. Cohort 2022-23. Graduate Outcomes work or further study 95% (2022-23; Discover Uni snapshot 2026-06-21)
Published threshold met Discover Uni suppresses continuation data below its publication threshold. Cohort 2022-23. Continuation 95% (2022-23; Discover Uni snapshot 2026-06-21)
Curriculum & modules
Real modules published for this course, grouped only where the source gives a year, stage or level.
Stage 1 6 modules
- Mathematics for EngineeringCompulsory
Module details
Mathematics is the fundamental language of engineering, allowing complex ideas to be described, formulated and developed. This module gives you a strong foundation of key mathematical techniques and methods required by most other modules in our engineering courses. Topics covered include complex numbers, calculus, linear algebra, statistics and probability. Throughout the module, you'll tackle real-world engineering problems. These include the study of mechanical and electrical systems, the use
- Electronics For EngineersCompulsory
Module details
Electronics underpins all of modern life, from everyday household items to the most sophisticated supercomputers. It enables devices such as ultra-low power wearable health monitors through to megawatt wind turbines. You'll begin your engineering journey by learning fundamental circuit analysis and fabrication skills. This will enable you to begin engineering project work right from your first year. You'll also explore the vital and trusted role that engineers play in supporting and transforming
- Fundamentals of ProgrammingCompulsory
Module details
Programming underpins all facets of modern life, from basic software applications to complex artificial intelligence systems. It enables everything from simple mobile apps to large-scale enterprise solutions. You'll embark on your programming journey here, mastering fundamental coding concepts and development skills. This foundation will empower you to dive into programming projects right from your first year through lectures, workshops and programming challenges. You'll also examine the pivotal
- Engineering Materials and DesignCompulsory
Module details
The success of an engineering product relies on the combination of careful mechanical design, strategic material selection, and a deep understanding of mechanics. These elements collectively shape the product's performance, durability, and overall effectiveness, highlighting their essential role in the development of any successful engineering solution. You'll learn how to develop an engineering drawing of a product using a Computer-Aided Design (CAD) system and choose the best materials from a
- Design and Manufacturing ProjectCompulsory
Module details
To bring your engineering education to life, you'll do a project in each year of study. In the Stage 1 project, you'll gain hands-on experience, allowing you to apply theoretical knowledge to real-world problems. This will enhance your understanding of engineering principles and concepts. Throughout this process, you will apply electronic and mechanical design skills and programming/software knowledge to describe and produce a physical solution in alignment with a technical specification. You ar
- Electronic CircuitsCompulsory
Module details
Electronic Engineers need a knowledge of both analogue and digital electronic circuits and electronic devices to effectively design future products. This module introduces you to analysis and design techniques and electronic component properties. You'll learn using circuit analysis software, commonly used in industry and practical work using industrial standard measurement equipment.
Stage 2 5 modules
- Mechatronics and MeasurementsCompulsory
Module details
Engineers work in interdisciplinary teams to overcome the challenges of intelligent engineering systems. Smart engineering systems are not simple mechanical or electronic components, but the result of synergistic integration between mechanical engineering, electronics, computer science and control. You'll learn to apply this interdisciplinary approach to develop innovative solutions that would not be possible with a single-discipline focus. You'll gain applied knowledge of sensors, actuators, an
- Microcomputer TechnologyCompulsory
Module details
Microcomputer technology is widely used in the design and development of modern computer systems. Many of us use such applications every day, in devices such as smartphones, washing machines, microwaves and cars. In this module, you'll learn general principles of computer architecture and understand how the microprocessor executes instructions, interacts with hardware components and communicates with memory and I/O devices. The most common microprocessors and microcontrollers will be to compare
- Electronics and Digital IC DesignCompulsory
Module details
Building on the material from Stage 1, in this module you will delve further into electronic engineering topics covering the principles and operation of essential electronic components and systems. You will learn about different passive and active electronic components (e.g., passive and active filters) focusing on both theoretical and practical aspects pertaining to the design of modern analogue and digital systems including frequency response characteristics, power-consumption and noise. You w
- Embedded Systems and IoTCompulsory
Module details
Embedded systems in conjunction with the Internet of Things (IoT) are used to create systems that can sense in real-time different aspects of their environment, collect and transmit information for a vast number of applications including smart cities, smart agriculture and smart factories (Industry 4.0). This information can then be used to transform the day-to-day operation of our cities and businesses making them more efficient and less wasteful of resources. This module introduces the theory
- Signal Processing and Control SystemsCompulsory
Module details
Signal processing as well as control systems are vital to ensure stable, safe and optimal operation of many modern devices and systems such as drones, robots and other automated platforms. This module will provide you the underpinning concepts, knowledge and methodologies in signal processing and control theory to apply to systems from your engineering disciplines. The control systems part will include both continuous and discrete time systems. The signal processing part is focused on signals, s
Source: provider course page. Modules can change; required/optional status, credits, descriptions and assessment are shown only when explicitly published.
Course in depth
What this course covers, who it suits and where it leads.
What you'll study
This course combines electronics and computing, developing expertise in circuit design, embedded systems, and programming. You'll typically begin with engineering mathematics, mechanics and materials, and foundational design skills. In Year 2, you'll progress to circuits and systems, engineering analysis and computing, and undertake a group design project. Year 3 focuses on specialist options such as robotics and mechatronics, energy and sustainability, electrical and electronic systems, or the Chartered (CEng) pathway, alongside professional engineering practice and a substantial individual project that forms the centrepiece of your degree.
Who it's for
You're suited to this course if you're intellectually curious about how electronic and computational systems work, and you want to understand both the detail and the bigger picture. Strength in problem-solving, logical thinking, and practical reasoning will serve you well. The programme appeals to those who enjoy moving between theory and its real-world application, designing circuits, writing embedded code, troubleshooting systems. You'll find it rewarding if you're self-directed enough to manage an independent research project, and if you're willing to develop professional skills alongside technical ones. Prior knowledge of electronics or advanced programming isn't essential, though familiarity with A-level physics and mathematics helps.
Careers & job market
Nationally, 90% of engineering graduates are in work or further study within 15 months of finishing their degree. Among those working, 80% are in highly skilled roles or pursuing further study. Graduate earnings across the field vary: starting salaries typically fall between £29,000 and £35,000; after five years, they range from £33,150 to £46,800. Your particular specialism, employer, and role will shape your trajectory.
University & format
The BEng (Hons) Electronic and Computer Engineering is delivered full-time over 3 years at the University of Kent, a public university based in Canterbury. The course is taught in English. It is a recognised UK degree-awarding body, and the degree is nationally recognised. The University of Kent holds Silver for teaching quality in the Office for Students' TEF 2023.
Student satisfaction
How students on this course answered the National Student Survey, by theme.
Share of students responding positively.
Published threshold met NSS publication requires sufficient responses; small differences are not a rank. NSS mean of 7 published themes (Discover Uni snapshot 2026-06-21)
Applicant information
The next application dates for this course, followed by facts the provider publishes.
- 2027 entryCompleted applications can be submitted
Your application needs a reference before you can send it.
- 2026 entryFinal date for 2026 applications
Applications must reach UCAS by 18:00 UK time.
- 2026 entryLast day to add a Clearing choice
Check that this course still has a vacancy before adding it.
- 2027 entryEqual-consideration deadline
18:00 UK time for most undergraduate courses.
Show 5 later dates
- 2027 entryUCAS Extra opens
Applicants who used all five choices and hold no offer may be able to add another choice.
- 2027 entryLast day applications go directly to providers
Applications received after 18:00 UK time are entered into Clearing.
- 2027 entryClearing opens
Eligible applicants can see vacancies and release themselves into Clearing.
- 2027 entryFinal date for 2027 applications
Applications must reach UCAS by 18:00 UK time.
- 2027 entryLast day to add a Clearing choice
Check that this course still has a vacancy before adding it.
Provider-published requirement; check the linked course page before applying.
Names detected beside accreditation or recognition copy on the provider course page; verify the route and intake.
Year in industry. Availability, selection and pay can vary.
Entry & how to get in
Who gets in
What recently admitted students actually held, official admissions data, not a stated requirement.
UCAS tariff of entrants
Grades are the A-level equivalent of each points band. Tap a band to check your own chances below.
Qualifications held on entry
| Qualification | Share |
|---|---|
| A-levels or equivalent | 70% |
| another higher-education qualification | 20% |
| a Baccalaureate | 5% |
| an Access course | 5% |
Entry & your chances
An honest read from the official entry data, plus your personal match.
Accepted students came in with a broad spread of qualifications and UCAS points. If you're worried about grades, this course has historically taken a wide range, and contextual offers may apply.
Will you get in? Plot your grades
Pick your predicted A-levels and watch your UCAS points land on the real spread of students admitted to this course.
Each bar is the share of admitted students in that UCAS-points band (lower → higher). Grades show the A-level equivalent.
Based on the official admitted-student tariff distribution. Many universities make contextual (reduced-grade) offers, so a result below the range doesn’t rule you out.
How to apply
Undergraduate applications go through UCAS. Here’s what matters for this course, the right deadline, the grades to aim for, and the steps in order.
- 1Register on UCAS Hub
Create your UCAS application and add this course (code H692). One application covers up to five choices.
- 2Write your personal statement
A single statement covers all your choices, so keep it broad enough for similar courses while showing genuine interest in this subject.
- 3Submit by 13 January 2027, 18:00 UK time
UCAS equal-consideration deadline for most undergraduate courses. Source: UCAS 2027 dates.
- 4Reply to your offers
When decisions are in, pick a firm (first) choice and an insurance (back-up) choice with slightly lower grades.
- 5Results day & confirmation
On results day (mid-August) your place is confirmed if you meet the offer. Just missed? Talk to the university, or find a place through Clearing.
Fees & funding
What this course costs and how UK student finance covers it.
Tuition per year
Provider fee page (England 2026/27 cap where not stated).
Check fees at University of Kent →For students who normally live in England
2026/27 Student Finance England figures. Maintenance support is means-tested and this two-point view is not an entitlement calculator. The course total uses its published length and home fee where both are available; a missing full-time fee uses the clearly labelled England-cap scenario, while part-time fees and unknown lengths are never guessed. Use the official calculator. Scotland, Wales and Northern Ireland use separate systems: SAAS, Student Finance Wales, and Student Finance NI.
Starting on or after 1 January 2027?
The Lifelong Learning Entitlement is a separate system. A new learner’s tuition entitlement is currently stated as £39,160 (about 480 credits at 2026/27 fee levels), subject to prior study and eligibility. Check the official LLE guide.
Paying for it
- Tuition Fee Loan: can cover eligible tuition up to the applicable limit and is paid straight to the provider.
- Maintenance Loan: up to £10,830/yr away from home outside London (England, 2026/27), means-tested on household income.
- Repayment: 9% of income above £25,000, nothing below it; written off after 40 years.
- Earn alongside: most students work part-time in term, part-time roles on the StudySmarter job board.
England figures shown; Scotland, Wales & NI run their own schemes, check gov.uk.
Scholarships & bursaries you could qualify for
That does not mean no funding exists. Check the university directory for current amounts, eligibility and application dates.
We only display a named award when its provider source identifies the award and who it is for.
Still deciding what to study?
StudyKit brings course choice, applications and funding together in one place, with a personal AI assistant. Find what really fits you and start your UCAS application step by step.
Careers & earnings
What Engineering graduates actually earn, from real outcome data, 15 months, 3 years and 5 years after graduating.
Graduate earnings: this course
| When | Median | Typical range | Graduates |
|---|---|---|---|
| 15 months after | £32,000 | £29,000 – £35,000 | 30 |
| 3 years after | £35,000 | £29,000 – £40,500 | 80 |
| 5 years after | £43,500 | £33,500 – £55,500 | 80 |
Nominal earnings for graduates of this course/subject at this provider. Moderate evidence. Published sample: 30; avoid reading small differences as meaningful. Cohort 2022-23.
Graduate outcomes, 15 months on: this course
- 1Graduate roleFirst role after the degree · 0–2 yrs
- 2Specialist / PractitionerWorking in engineering · 2–5 yrs
- 3Senior / LeadLeading work and people · 5–10 yrs
- 4Head of / ExpertSenior leadership or deep expertise · 10+ yrs
How pay grows: this course vs Engineering nationally
National figures for Engineering graduates, HESA Graduate Outcomes (15 months) and the Longitudinal Education Outcomes (LEO) dataset (3 & 5 years). These are national, not university-specific; actual pay varies by employer, region, role and experience. Different cohorts, so the bars are not one group over time.
Work out your pay
Headline figures hide a lot. Calculate realistic take-home pay for this field by role, region and experience, then check your CV before you apply.
What happened to 100 students?
Choose an outcome to translate the published percentage into a simple 100-person view. Each dot represents one percentage point, not an individual tracked student.
were in work or further study
15 months after graduation
Source: Discover Uni, using Graduate Outcomes and continuation data. Cohorts: 2022-23. Moderate evidence. Published sample: 30; avoid reading small differences as meaningful. Cohort 2022-23. Each tab is a separate published measure; categories can overlap and should not be added together.
Value compared with similar courses
How this course’s 5-year median earnings compare with Engineering courses at the same study level.
Compared with 2,256 courses with compatible official earnings data. This is a course-value comparison, not a quality ranking.
UK occupations graduates enter
Published graduate destinations, joined conservatively to UK SOC 2020, ONS pay and Skills England demand.
- Engineering professionalsSOC 2020 212 · 35% of published destinations · ASHE median £50,325
- Information Technology ProfessionalsSOC 2020 213 · 30% of published destinations · ASHE median £55,357
- Elementary occupationsSOC 2020 9 · 10% of published destinations · ASHE median £19,087
Discover Uni JOBLIST/JOBTYPE; ONS ASHE 2025 provisional, all employee jobs; Skills England Occupations in Demand 2025. SOC is shown only for an exact normalised label match; demand is shown only at exact four-digit SOC. Published sample: 30; response rate: 55%. Pay describes the occupation across workers, not a guaranteed graduate salary.
Is BEng (Hons) Electronic and Computer Engineering worth it?
Yes, for most students BEng (Hons) Electronic and Computer Engineering is well worth it. On its graduates’ median earnings, the course is worth about +£165,630 more over the first ten years of work than going straight to a job, after the fees you pay.
Cumulative earnings vs. going straight to work at 18, counting tuition and 3 years of wages given up while studying. The line clears zero around year 9.5. This is a simplified gross-earnings comparison, not a forecast of cash loan repayments.
Model: this course’s own median graduate earnings (Graduate Outcomes / LEO) above the £24,000 non-graduate baseline (ONS), net of £9,790/yr over 3 years (published course home fee). Eligible England-domiciled students can apply for a Tuition Fee Loan; repayments are 9% only on income above the threshold, with anything left written off after 40 years. That makes the cash flow different from conventional commercial debt. Opportunity cost assumes £18,000 gross earnings forgone in each study year; figures are nominal and exclude tax, living costs, investment returns and loan interest. A simplified estimate. Earnings and actual fees vary by graduate, provider, fee status and UK nation.
Job market & outlook
How Engineering graduates fare in the labour market, and how AI is reshaping the work.
How AI is changing the work
AI doesn't replace the profession, it shifts it: routine tasks get automated, while judgement, working with people and using AI well become more valuable.
What AI takes off your plate
- Routine information gathering
- First-draft writing and summaries
- Standard analysis and admin
- Repetitive processing tasks
More human than ever
- Judgement and original thinking
- Working with and leading people
- Owning and sense-checking AI output
- Ethics and accountability
The strongest graduates pair subject depth with the ability to use AI tools critically.
Roles & employers
Where Engineering graduates typically go, indicative destinations from graduate career data. Each role links to live openings on the StudySmarter job board.
Roles graduates go into
Where they work
- Engineering & manufacturing firms
- Automotive & aerospace
- Energy & utilities
- Defence & consultancies
Jobs after this course
Current roles from the StudySmarter job board that suit Engineering graduates.
Engineering Surveyor (Machine Control)BAM UK & IrelandEngineering Operations Project ManagerFdo Consulting LimitedEngineering ManagerVerto PeopleEngineering ManagerRobert WaltersEngineering ManagerPremier Technical RecruitmentEngineering ManagerRedline Group LtdIs this course right for you?
The essentials UK applicants ask about: finance, outcomes, entry and quality.
Student finance
Published home tuition is £9,790/year for this course. If you normally live in England, eligible students can apply for a Tuition Fee Loan, plus a Maintenance Loan for living costs. Under Plan 5 you repay 9% of income above £25,000, nothing below that, and the balance is written off after 40 years.
Where graduates go
95% were in work or further study 15 months after graduating, with a median salary of £32,000. See the full breakdown in Careers & earnings above.
Your entry chances
Use the UCAS points calculator above to see how your predicted grades compare with admitted students, and whether a contextual offer could apply.
Official-data snapshot
Averaging the official measures published for it, this course scores 8.6 out of 10: NSS 67.1% · in work or study 95% · continued 95%.
Who studies here and in this subject?
Provider- and UK subject-level context.
The University of Kent
Engineering and technology across the UK
HESA student record 2024/25. Counts are rounded.
Local crime-data context
A neutral snapshot around the published teaching location.
Around Canterbury
318 street-level reports returned within roughly one mile across 2026-04 to 2026-06.
Police.uk street-level API. Approximate locations, not confined to campus. England, Wales and Northern Ireland; not Scotland.
Is Engineering right for you?
Tick what applies to you and see how good a fit it is.
International students
What applying to University of Kent from outside the UK involves: fees, English, visa, funding and living costs.
Tuition fees
International tuition is £23,500 / year for this course (from the provider’s fee page). You’re not eligible for UK Tuition Fee or Maintenance Loans, so plan for fees plus living costs upfront.
English language
Most UK undergraduate courses ask for around IELTS 6.0–6.5 (no band below 5.5–6.0), or an accepted equivalent. If you’re just short, most universities run a pre-sessional English course that counts towards the requirement.
Student visa
You’ll usually need a Student visa (Student Route). After you accept an offer the university issues a CAS; you then show funds for fees plus about £1,023–£1,334/month living costs and pay the Immigration Health Surcharge for NHS access.
Scholarships & funding
Many universities offer international/global scholarships (often £2,000–£6,000/yr), check University of Kent’s funding pages.
Living costs
Budget roughly £1,100–£1,400/month outside London and £1,400–£1,800/month in London for rent, food and travel; the figure also matters for your visa.
Working while you study
A Student visa usually allows up to 20 hours/week in term time and full-time in holidays, useful alongside study, though not something to rely on for fees.
Visa rules and fees change. Always confirm the current requirements with University of Kent and gov.uk before you apply.
Related courses
More at University of Kent
BEng (Hons) Biomedical Engineering including a Foundation YearBEng (Hons) · University of KentBEng (Hons) Biomedical Engineering with a Year in IndustryBEng (Hons) · University of KentBEng (Hons) Biomedical EngineeringBEng (Hons) · University of KentBEng (Hons) Electronic and Computer Engineering with a Year in IndustryBEng (Hons) · University of Kent
Common questions
How competitive is entry?
What are the entry requirements?
What do graduates go on to do?
What will it cost me?
Request information about BEng (Hons) Electronic and Computer Engineering
Prospectus, key dates, entry and funding, free to your inbox.