MEng (Hons) Mechanical Engineering at University of Lancashire. Over four years, you'll develop competence across core theory, research methods, and applied practice, then build specialist depth through optional modules and a substantial independent project.
This Mechanical Engineering MEng degree teaches you to design objects and systems with motion. You From the provider’s course page.
MEng (Hons) Mechanical Engineering is an Integrated Master's degree (MEng (Hons)) at the University of Lancashire, based in Main Campus. It runs 4 years, studied full-time.
For Mechanical engineering graduates from this provider, 85% were in work or further study 15 months after graduating, 70% in highly skilled roles, typical earnings around £30,000. (HESA Graduate Outcomes / LEO, via Discover Uni.)
For the typical curriculum, specialisations, career paths and graduate earnings for Engineering, see the sections below.
The arithmetic mean of the official measures available for this course: NSS satisfaction, graduate activity and continuation.
Published threshold met NSS publication requires sufficient responses; small differences are not a rank. NSS mean of 7 published themes (Discover Uni snapshot 2026-06-21)
Limited evidence Published sample: 15; treat comparisons cautiously. Cohort 2021-23. Graduate Outcomes work or further study 85% (2022-23; Discover Uni snapshot 2026-06-21)
Published threshold met Discover Uni suppresses continuation data below its publication threshold. Cohort 2021-23. Continuation 80% (2021-23; Discover Uni snapshot 2026-06-21)
Real modules published for this course, grouped only where the source gives a year, stage or level.
This module aims to develop your knowledge and skills in Engineering Design. You'll develop skills in design methodology, computer aided design, technical drawing and sustainable design.
This module enables you to recognise and use essential core mathematical methods and computational analysis to support further study of engineering and technology.
This module imparts knowledge of computer-aided design, programming, digital electronics, and manufacturing techniques. It readies you for diverse engineering tasks involving system design, manufacturing, and testing in various disciplines.
This module will develop and establish the fundamental principles of engineering science. You'll learn basic engineering practice and problem-solving techniques. You'll also be introduced to associated measurement techniques.
This module will provide you with an understanding of fluid power systems in modern industry. You will learn engineering theory applications and practice.
The aim of this module is to further develop the core principles and theory of mechanical engineering science.
This module will introduce modern engineering experimentation. This includes experiment design, system calibration, data acquisition, analysis and presentation. You will gain hands-on experience with modern instrumentation and systems-level experimentation.
In this module you will develop technical knowledge related to concept evolution, detail design and prototype development. You will also learn project management methods to prepare for your final year project.
This module will introduce you to the principles of fluid mechanics and thermodynamics in the context of aerodynamics and heat engines and motor sports engineering. It will develop your problem solving, mathematical modelling and computational modelling skills.
In this module you will develop the skills and knowledge that is needed to be able to participate in an operations management team.
You will develop your analytical and design skills regarding dynamics, loading, geometry and materials within engineering design and support your skills learnt in analytical design.
This module aims to further develop your analytical knowledge and techniques necessary to analyse and solve a variety of engineering situations and problems.
This module involves planning, executing, and reporting on an engineering project. The project includes investigation, analysis, design, evaluation, testing, and manufacturing, based on current research or development.
In this module, you will learn about the design of mechanical engineering systems. You will experience the design methodologies and carry out parametric analyses.
This module will enable you to develop enhanced skills and knowledge in Mechanics and Materials.
This module will enable you to develop the skills and knowledge required to lead an operations management team.
This module will introduce you to the concept of engineering simulation using computer simulation software.
This module is designed to provide you with an extended knowledge of the theory and practice of heat transfer, the ability to apply this knowledge to problem situations in the nuclear industry and a knowledge of the use of finite methods in this context.
The aim of this module is to develop your skills and knowledge in solving a variety of mechanical engineering situations and problems. You'll use specific research informed case studies, promote critical thinking and use computer based engineering tools.
You will develop a critical understanding of design processes that evaluate end-user experience. Topics covered include lubrication; calculating friction coefficients and wear rates; techniques for the selection, design and performance evaluation of fluid film bearings. You will learn about methods for obtaining performance data and determining the cause of tribological failures. You will also learn about appropriate maintenance and design practices for product sustainability and operational cos
On this module you'll design, develop and demonstrate an integrated product comprising of structure and system. Your product will include considerations regarding safety, business, commercial and environmental impacts.
You will gain experience in the processes of maintaining product integrity within engineering design and the product cycle. You'll look at the responsibilities of the engineer to both the enterprise and society by looking at both national and international standards. You will also analyse and evaluate several risks and ethical and legal responsibilities.
This module will allow you to enhance research, investigative, evaluative and use problem solving abilities to develop a systems approach to analytical design and methodologies, investigate factors influencing the design and performance of a suitably complex engineering systems and integrate the fundamental principles.
Source: provider course page. Modules can change; required/optional status, credits, descriptions and assessment are shown only when explicitly published.
What this course covers, who it suits and where it leads.
This MEng degree teaches you to design objects and systems with motion. You'll usually start with engineering foundations: mathematics, mechanics, materials science and practical CAD and workshop skills. In Year 2, a course like this normally moves to core discipline work, such as thermodynamics and fluids, circuits and systems, alongside simulation, programming and a group design project reviewed to industry standards. By Year 3, you'll pursue specialist options such as robotics and mechatronics, energy and sustainability, or civil and structural engineering, whilst completing professional engineering practice (covering safety, ethics and project management) and an individual design or research project. Throughout, the progression balances theory with hands-on problem-solving.
You're someone drawn to understanding how things work and eager to solve practical problems through engineering. You'll thrive if you have strong analytical skills, enjoy working with both theory and hands-on application, and want to develop the professional competence needed to design systems and manage projects. This degree suits those with curiosity about mechanical systems, comfort with mathematics, and genuine interest in applying technical knowledge to real engineering challenges, not just passing exams. You'll find the balance between rigorous study and practical work rewarding.
Nationally, 90% of graduates in Engineering courses are in work or further study within 15 months of graduating. Of those working, 80% are in highly skilled roles or undertaking further study. Starting salaries typically range from £29,000 to £35,000; after five years, the range widens to £33,150–£46,800. Your specific path depends on your specialisation, employers' needs, and career choices after graduation.
The University of Lancashire, a University located on its Main Campus, offers this MEng (Hons) Mechanical Engineering as a full-time, 4-year integrated Master's degree taught in English. The university was founded in 1828 and is a recognised UK degree-awarding body; degrees are nationally recognised. Teaching quality is accredited Silver in the Office for Students' TEF 2023. The degree qualifies you towards a Chartered (CEng) pathway if you choose that specialism.
How students on this course answered the National Student Survey, by theme.
Share of students responding positively.
Published threshold met NSS publication requires sufficient responses; small differences are not a rank. NSS mean of 7 published themes (Discover Uni snapshot 2026-06-21)
The next application dates for this course, followed by facts the provider publishes.
Your application needs a reference before you can send it.
Applications must reach UCAS by 18:00 UK time.
Check that this course still has a vacancy before adding it.
18:00 UK time for most undergraduate courses.
Applicants who used all five choices and hold no offer may be able to add another choice.
Applications received after 18:00 UK time are entered into Clearing.
Eligible applicants can see vacancies and release themselves into Clearing.
Applications must reach UCAS by 18:00 UK time.
Check that this course still has a vacancy before adding it.
Placement year. Availability, selection and pay can vary.
See and book current events. Dates can fill or change.
What recently admitted students actually held, official admissions data, not a stated requirement.
Grades are the A-level equivalent of each points band. Tap a band to check your own chances below.
| Qualification | Share |
|---|---|
| A-levels or equivalent | 95% |
| another higher-education qualification | 5% |
An honest read from the official entry data, plus your personal match.
Accepted students came in with a broad spread of qualifications and UCAS points. If you're worried about grades, this course has historically taken a wide range, and contextual offers may apply.
Pick your predicted A-levels and watch your UCAS points land on the real spread of students admitted to this course.
Each bar is the share of admitted students in that UCAS-points band (lower → higher). Grades show the A-level equivalent.
Based on the official admitted-student tariff distribution. Many universities make contextual (reduced-grade) offers, so a result below the range doesn’t rule you out.
Undergraduate applications go through UCAS. Here’s what matters for this course, the right deadline, the grades to aim for, and the steps in order.
Create your UCAS application and add this course (code H300). One application covers up to five choices.
A single statement covers all your choices, so keep it broad enough for similar courses while showing genuine interest in this subject.
UCAS equal-consideration deadline for most undergraduate courses. Source: UCAS 2027 dates.
When decisions are in, pick a firm (first) choice and an insurance (back-up) choice with slightly lower grades.
On results day (mid-August) your place is confirmed if you meet the offer. Just missed? Talk to the university, or find a place through Clearing.
What this course costs and how UK student finance covers it.
Provider fee page (England 2026/27 cap where not stated).
Check fees at University of Lancashire →2026/27 Student Finance England figures. Maintenance support is means-tested and this two-point view is not an entitlement calculator. The course total uses its published length and home fee where both are available; a missing full-time fee uses the clearly labelled England-cap scenario, while part-time fees and unknown lengths are never guessed. Use the official calculator. Scotland, Wales and Northern Ireland use separate systems: SAAS, Student Finance Wales, and Student Finance NI.
The Lifelong Learning Entitlement is a separate system. A new learner’s tuition entitlement is currently stated as £39,160 (about 480 credits at 2026/27 fee levels), subject to prior study and eligibility. Check the official LLE guide.
England figures shown; Scotland, Wales & NI run their own schemes, check gov.uk.
Named awards published by the university. Compare the eligibility and application route before budgeting for one.
Undergraduates from low-income households, subject to eligibility
Eligible undergraduate students with experience of care
Eligible undergraduate or taught-postgraduate unpaid carers
Forced migrants who are not eligible for student finance
Amounts, exclusions and deadlines can change. An award is not guaranteed unless the university confirms it.
StudyKit brings course choice, applications and funding together in one place, with a personal AI assistant. Find what really fits you and start your UCAS application step by step.
What Engineering graduates actually earn, from real outcome data, 15 months, 3 years and 5 years after graduating.
| When | Median | Typical range | Graduates |
|---|---|---|---|
| 15 months after | £30,000 | £27,500 – £32,000 | 15 |
| 3 years after | £29,500 | £23,500 – £35,500 | 55 |
| 5 years after | £36,000 | £29,000 – £41,000 | 60 |
Nominal earnings for graduates of this course/subject at this provider. Limited evidence. Published sample: 15; treat comparisons cautiously. Cohort 2021-23.
National figures for Engineering graduates, HESA Graduate Outcomes (15 months) and the Longitudinal Education Outcomes (LEO) dataset (3 & 5 years). These are national, not university-specific; actual pay varies by employer, region, role and experience. Different cohorts, so the bars are not one group over time.
Headline figures hide a lot. Calculate realistic take-home pay for this field by role, region and experience, then check your CV before you apply.
Choose an outcome to translate the published percentage into a simple 100-person view. Each dot represents one percentage point, not an individual tracked student.
15 months after graduation
Source: Discover Uni, using Graduate Outcomes and continuation data. Cohorts: 2022-23. Limited evidence. Published sample: 15; treat comparisons cautiously. Cohort 2021-23. Each tab is a separate published measure; categories can overlap and should not be added together.
How this course’s 5-year median earnings compare with Engineering courses at the same study level.
Compared with 2,256 courses with compatible official earnings data. This is a course-value comparison, not a quality ranking.
Published graduate destinations, joined conservatively to UK SOC 2020, ONS pay and Skills England demand.
Discover Uni JOBLIST/JOBTYPE; ONS ASHE 2025 provisional, all employee jobs; Skills England Occupations in Demand 2025. SOC is shown only for an exact normalised label match; demand is shown only at exact four-digit SOC. Published sample: 20; response rate: 60%. Pay describes the occupation across workers, not a guaranteed graduate salary.
How Engineering graduates fare in the labour market, and how AI is reshaping the work.
AI doesn't replace the profession, it shifts it: routine tasks get automated, while judgement, working with people and using AI well become more valuable.
The strongest graduates pair subject depth with the ability to use AI tools critically.
Where Engineering graduates typically go, indicative destinations from graduate career data. Each role links to live openings on the StudySmarter job board.
Current roles from the StudySmarter job board that suit Engineering graduates.
Engineering Surveyor (Machine Control)BAM UK & IrelandEngineering Operations Project ManagerFdo Consulting LimitedEngineering ManagerVerto PeopleEngineering ManagerRobert WaltersEngineering ManagerPremier Technical RecruitmentEngineering ManagerRedline Group LtdThe essentials UK applicants ask about: finance, outcomes, entry and quality.
For comparison, the standard full-time England tuition cap is up to £9,790 per year in 2026/27; the actual fee varies by course and provider. If you normally live in England, eligible students can apply for a Tuition Fee Loan, plus a Maintenance Loan for living costs. Under Plan 5 you repay 9% of income above £25,000, nothing below that, and the balance is written off after 40 years.
85% were in work or further study 15 months after graduating, with a median salary of £30,000. See the full breakdown in Careers & earnings above.
Use the UCAS points calculator above to see how your predicted grades compare with admitted students, and whether a contextual offer could apply.
Averaging the official measures published for it, this course scores 8.1 out of 10: NSS 76.9% · in work or study 85% · continued 80%.
Provider- and UK subject-level context.
HESA student record 2024/25. Counts are rounded.
A neutral snapshot around the published teaching location.
2,263 street-level reports returned within roughly one mile across 2026-04 to 2026-06.
Police.uk street-level API. Approximate locations, not confined to campus. England, Wales and Northern Ireland; not Scotland.
Tick what applies to you and see how good a fit it is.
What applying to University of Lancashire from outside the UK involves: fees, English, visa, funding and living costs.
International tuition is £17,325 / year for this course (from the provider’s fee page). You’re not eligible for UK Tuition Fee or Maintenance Loans, so plan for fees plus living costs upfront.
Most UK undergraduate courses ask for around IELTS 6.0–6.5 (no band below 5.5–6.0), or an accepted equivalent. If you’re just short, most universities run a pre-sessional English course that counts towards the requirement.
You’ll usually need a Student visa (Student Route). After you accept an offer the university issues a CAS; you then show funds for fees plus about £1,023–£1,334/month living costs and pay the Immigration Health Surcharge for NHS access.
Many universities offer international/global scholarships (often £2,000–£6,000/yr), check University of Lancashire’s funding pages.
Budget roughly £1,100–£1,400/month outside London and £1,400–£1,800/month in London for rent, food and travel; the figure also matters for your visa.
A Student visa usually allows up to 20 hours/week in term time and full-time in holidays, useful alongside study, though not something to rely on for fees.
Visa rules and fees change. Always confirm the current requirements with University of Lancashire and gov.uk before you apply.
BEng (Hons) Aerospace EngineeringBEng (Hons) · University of LancashireBEng (Hons) Aerospace Engineering with Pilot StudiesBEng (Hons) · University of LancashireBEng (Hons) Aerospace Engineering with Pilot Studies (with Foundation Year)BEng (Hons) · University of LancashireBEng (Hons) Aerospace Engineering (with Foundation Year)BEng (Hons) · University of LancashireProspectus, key dates, entry and funding, free to your inbox.
Prospectus, key dates, entry and funding, free to your inbox.
