Electronic and Electrical Engineering students
Check eligibility →
University of Strathclyde · Undergraduate
MEng (Hons) Electrical and Mechanical Engineering with International Study Integrated Master's degree at Strathclyde
MEng (Hons) Electrical and Mechanical Engineering with International Study at Strathclyde. You'll work through core theory, research methods and applied practice, supported by specialist options and an independent project that lets you pursue genuine depth.
MEng (Hons)
Award
5
Years
Full-time
Study mode
92%
in work/study (15m)
About this course
MEng (Hons) Electrical and Mechanical Engineering with International Study is an Integrated Master's degree (MEng (Hons)) at Strathclyde, based in John Anderson Campus. It runs 5 years, studied full-time.
For Mechanical engineering graduates from this provider, 92% were in work or further study 15 months after graduating, 80% in highly skilled roles, typical earnings around £32,500. (HESA Graduate Outcomes / LEO, via Discover Uni.)
For the typical curriculum, specialisations, career paths and graduate earnings for Engineering, see the sections below.
Course evidence score
The arithmetic mean of the official measures available for this course: NSS satisfaction, graduate activity and continuation.
9.0
/ 10
Exceptional
3 of 3 official measures
Student satisfaction
What students say in the National Student Survey
Strong79
Published threshold met NSS publication requires sufficient responses; small differences are not a rank. NSS mean of 7 published themes (Discover Uni snapshot 2026-06-21)
Graduate outcomes
In work or further study 15 months after graduating
Exceptional92
Moderate evidence Published sample: 85; avoid reading small differences as meaningful. Cohort 2022-23. Graduate Outcomes work or further study 92% (2022-23; Discover Uni snapshot 2026-06-21)
Continuation
Students who continue past their first year
Exceptional100
Published threshold met Discover Uni suppresses continuation data below its publication threshold. Cohort 2022-23. Continuation 100% (2022-23; Discover Uni snapshot 2026-06-21)
Curriculum & modules
Real modules published for this course, grouped only where the source gives a year, stage or level.
Year 1 7 modules
- Engineering Mechanics 1Compulsory
Module details
A study of mechanics gives you the basic tools to understand how the world, both natural and man-made. This class places more emphasis on the basic skills required to start to apply these concepts and principles to real engineering problem solving.
- Engineering Industry & ProfessionCompulsory
Module details
To provide an overview of industry and give you some understanding of the industry environment that you would enter as well as the types of roles you would/could undertake. To explain role and responsibility of the engineering profession and individual engineer.
- Electronic & Mechanical Techniques & Design 1Compulsory
Module details
This module aims to: introduce you to the practical and professional skills required of an engineer underpin theoretical concepts introduced elsewhere in Year 1 modules introduce you to individual and group project work expose you to problems requiring system integration and design encourage innovation in the context of project work facilitate the development of a range of transferable skills
- Electronic & Electrical Principles 1Compulsory
Module details
To provide you with a foundational understanding of the analysis and design of both analogue and digital electronic circuits.
- Heat & Flow 1Compulsory
Module details
Knowledge of thermodynamics, heat and fluid flow are important for the understanding and design of thermal and hydraulic systems involving energy conversion and transmission, such as engines and turbines, pumps and compressors, and associated pipework. The aim of the class is to introduce the basic concepts of thermodynamics and fluid mechanics, and the applications thereof, as a foundation for further studies.
- Engineering Mathematics 1ECompulsory
Module details
To give a basic understanding of the concepts and applications of mathematical functions, differentiation, integration and complex numbers. The class also provides an introductory experience of using mathematical tools to apply these concepts to practical engineering examples.
- Engineering Mathematics 2ECompulsory
Module details
To give a basic understanding of the concepts and applications of calculus, geometry, vectors, matrices and numerical methods.
Year 2 8 modules
- Engineering Mechanics 2Compulsory
Module details
The class aims to provide you with the basic skills to analyse dynamics problems, associated with bodies and simple mechanisms, from first principles. To develop skills, knowledge and understanding in the areas of structural analysis and elementary stress analysis.
- ElectromagnetismCompulsory
Module details
You'll gain an understanding of the application of electromagnetic effects in practical devices and develop the mathematical skills necessary to analyse these effects in simple geometries.
- Engineering Design & ManufactureCompulsory
Module details
This class aims to introduce you to concepts and methodology required to undertake effective design and development of engineering systems. The product development process will be introduced and through practice, a working knowledge of appropriate engineering design processes, tools and techniques will be gained. An overview of manufacturing and the manufacturing industry will provide a general appreciation of the range of processes employed in manufacturing together with an understanding of how
- Electronic & Electrical Principles 2Compulsory
Module details
To introduce you to the analysis and design of analogue circuits and systems as used in electronics, energy & power systems, communications, control and analogue signal processing applications.
- Digital Electronic & Programming DesignCompulsory
Module details
To introduce you to the use of digital electronics and the rudiments of digital signal processing systems.
- Electronic & Mechanical Techniques & Design 2Compulsory
Module details
To develop a broad understanding of many aspects of engineering (general electrical and electronic, power engineering, mechanical engineering, computing and software) and to enhance generic skills required of a professional engineer (research, practical, team working, communications, reporting writing, oral presentation). You'll also benefit from two laboratory-based projects, which will enhance your understanding of important electrical and engineering principles that underpin many other classe
- Heat & Flow 2Compulsory
Module details
This class aims to deliver fundamental knowledge on fluid mechanics and thermodynamics and illustrate their importance to engineering systems. Thermodynamics is the science that is devoted to understanding energy in all its forms and how energy changes form.
- Engineering Mathematics 3ECompulsory
Module details
The aims of this class are: to develop the means of solving certain differential equations to consider applications of Taylor and Maclaurin series to generalise earlier ideas in calculus to deal with functions of several variables to discuss in more detail matrices, determinants and functions of a complex variable to introduce vector calculus and eigenvalues/eigenvectors
Year 3 9 modules
- Instrumentation & MicrocontrollersCompulsory
Module details
INSTRUMENTATION: To develop techniques for system modelling based on block diagrams and transfer functions and to use such techniques in the context of analysis and design. To introduce you to instrumentation and measurement as an interdisciplinary engineering activity. To explain the basic principles of feedback and control systems. MICROCONTROLLERS: To allow you to gain practical design, implementation and test experience of the techniques required to create combined hardware/software systems
- Engineering AnalysisCompulsory
Module details
It is important for you to see mathematics and statistics in the context of the computational problems they will be exposed to in their discipline. The aim of this class is to further develop your skills and abilities in advanced mathematical concepts in the field of engineering.
- Engineering Innovation & ManagementCompulsory
Module details
This class aims to provide you with an understanding of the importance of innovation in today's business environment. The class aims to also develop understanding and skills in the area of innovation management. It aims to develop practical skills for you to integrate a number of themes including: product development IP product finances project management market analysis with a view to successfully exploiting new ideas
- Engineering ComputingCompulsory
Module details
This class aims to: introduce you to writing software using the Python programming language with modern development tools provide you with an awareness of and skill in the use of a CAD software in the design of engineering systems
- Signals & SystemsCompulsory
Module details
The aim of this class is to introduce you to the fundamentals of continuous and discrete time signals and linear systems. At the end of this class, you should be able to mathematically and pragmatically define, analyse and design these systems.
- Dynamics 3Compulsory
Module details
This class aims to: introduce the general principles of the kinematics of rigid bodies and different types of motion: translation, rotation and general plane motion study the kinetics of rigid bodies focussing on plane motion, equations of motion, angular momentum and D'Alembert's Principle utilise the fundamentals taught in second year Dynamics to demonstrate the principles of analysis of the dynamic performance of mechanical engineering systems introduce the basics of modelling the vibrations
- Integrated DesignCompulsory
- Electronic & Electrical Principles 3Elective
Module details
This class promotes detailed understanding of the electrical and electromagnetic principles and their deployment in a range of engineering applications. These are associated with electromagnetic waves propagation in bounded and unbounded media. They are also in: electric power generation (both conventional and renewable) power distribution and energy utilisation electric transportation systems the propagation of electromagnetic waves in free space in insulating and conducting lossless and lossy
- Heat & Flow 3Elective
Module details
The class builds on your previous study of thermodynamics and extends this to cover mixtures
Source: provider course page. Modules can change; required/optional status, credits, descriptions and assessment are shown only when explicitly published.
Course in depth
What this course covers, who it suits and where it leads.
What you'll study
This integrated Master's course combines electrical and mechanical engineering alongside an international study year, giving you a broad foundation in both disciplines before specialising. You'll usually start with core mathematics, mechanics and materials science, then progress to thermodynamics, circuits and systems. Early on, you'll develop practical skills through CAD, workshop practice and a group design project assessed like industry work. In later years, a course like this normally moves towards specialist options, such as robotics and mechatronics, energy and sustainability, civil and structural engineering, or the chartered (CEng) pathway, supported by modules in professional engineering practice covering safety, ethics and project management. Your degree culminates in a substantial individual design or research project. The international study year is embedded within the five-year structure.
Who it's for
You're drawn to understanding how electrical and mechanical systems work together in real-world applications. You're analytical and methodical, comfortable with both theory and hands-on problem-solving, and you have the resilience to sustain study over five years. An international dimension appeals to you, whether for broadening your engineering perspective, building your global network, or simply experiencing engineering practice in another context. You're aiming for a role where your engineering knowledge carries genuine responsibility.
Careers & job market
Nationally, 90% of engineering graduates are in work or further study within 15 months of finishing their degree. Around 80% of working graduates are in highly skilled roles or continuing their studies. Across all graduates, starting salaries (15 months on) range from £29,000 to £35,000, growing to £33,150–£46,800 after five years. These figures reflect the whole population; your actual path depends on your specialisation, location and employer.
University & format
The University of Strathclyde is a public university founded in 1796, located at the John Anderson Campus in Glasgow. This MEng (Hons) Electrical and Mechanical Engineering with International Study is a 5-year full-time integrated Master's degree, taught in English. The university is a recognised UK degree-awarding body and is.
Student satisfaction
How students on this course answered the National Student Survey, by theme.
Share of students responding positively. Overall student satisfaction: 86%.
Published threshold met NSS publication requires sufficient responses; small differences are not a rank. NSS mean of 7 published themes (Discover Uni snapshot 2026-06-21)
Applicant information
The next application dates for this course, followed by facts the provider publishes.
Application timelineWhat happens next
- 2027 entryCompleted applications can be submitted
Your application needs a reference before you can send it.
- 2026 entryFinal date for 2026 applications
Applications must reach UCAS by 18:00 UK time.
- 2026 entryLast day to add a Clearing choice
Check that this course still has a vacancy before adding it.
- 2027 entryEqual-consideration deadline
18:00 UK time for most undergraduate courses.
Show 5 later dates
- 2027 entryUCAS Extra opens
Applicants who used all five choices and hold no offer may be able to add another choice.
- 2027 entryLast day applications go directly to providers
Applications received after 18:00 UK time are entered into Clearing.
- 2027 entryClearing opens
Eligible applicants can see vacancies and release themselves into Clearing.
- 2027 entryFinal date for 2027 applications
Applications must reach UCAS by 18:00 UK time.
- 2027 entryLast day to add a Clearing choice
Check that this course still has a vacancy before adding it.
AccreditationIET, IMechE
Names detected beside accreditation or recognition copy on the provider course page; verify the route and intake.
Entry & how to get in
Most entrants held A-levels or equivalent80% of accepted students came in with A-levels or equivalent (entrants over recent years).
Typical UCAS tariff: More than 240 pointsThe most common UCAS tariff band among accepted students. This is what entrants had, not a stated requirement.
Entry requirements are set by the universityGrades, subjects and contextual offers vary. Check Strathclyde's official course page for the current offer.
Who gets in
What recently admitted students actually held, official admissions data, not a stated requirement.
UCAS tariff of entrants
Grades are the A-level equivalent of each points band. Tap a band to check your own chances below.
Qualifications held on entry
| Qualification | Share |
|---|---|
| A-levels or equivalent | 80% |
| another higher-education qualification | 15% |
| Other | 5% |
Entry & your chances
An honest read from the official entry data, plus your personal match.
Competitive entry
Accepted students typically held strong UCAS tariffs. Check how your predicted grades compare and whether a contextual offer applies.
Will you get in? Plot your grades
Pick your predicted A-levels and watch your UCAS points land on the real spread of students admitted to this course.
Your UCAS points0
▾
Each bar is the share of admitted students in that UCAS-points band (lower → higher). Grades show the A-level equivalent.
Add your grades to see where you land
Based on the official admitted-student tariff distribution. Many universities make contextual (reduced-grade) offers, so a result below the range doesn’t rule you out.
How to apply
Undergraduate applications go through UCAS. Here’s what matters for this course, the right deadline, the grades to aim for, and the steps in order.
Apply by13 January 2027, 18:00 UK timefor this course
Typical gradesA*A*A*+A-level equivalent admitted students held
UCAS codeH3H6quote this on your application
- 1Register on UCAS Hub
Create your UCAS application and add this course (code H3H6). One application covers up to five choices.
- 2Write your personal statement
A single statement covers all your choices, so keep it broad enough for similar courses while showing genuine interest in this subject.
- 3Submit by 13 January 2027, 18:00 UK time
UCAS equal-consideration deadline for most undergraduate courses. Source: UCAS 2027 dates.
- 4Reply to your offers
When decisions are in, pick a firm (first) choice and an insurance (back-up) choice with slightly lower grades.
- 5Results day & confirmation
On results day (mid-August) your place is confirmed if you meet the offer. Just missed? Talk to the university, or find a place through Clearing.
💡 Many universities make a contextual (reduced-grade) offer, for example based on your school’s results, time in care, or where you live. Ask Strathclyde whether you’re eligible before you apply; it can lower the grades you need.
Fees & funding
What this course costs and how UK student finance covers it.
Tuition per year
International£30,950 / yr
Provider fee page. Set under Scotland's student-finance system; the provider's page is authoritative.
Check fees at Strathclyde →If you normally live in Scotland
For eligible Scottish-domiciled students at an eligible Scottish provider, SAAS can pay tuition directly. Living-cost support can combine bursary and loan and depends on household income and student circumstances. Students from elsewhere use their home funding body.
Check the current amounts with SAAS →Paying for it
- SAAS tuition payment: paid directly to the university for eligible Scottish-domiciled students, applied for through SAAS.
- Living-cost support: a mix of bursary and loan from SAAS, depending on household income.
- Repayment: only above the Scottish repayment threshold, and written off at the end of the plan term.
- Earn alongside: most students work part-time in term, part-time roles on the StudySmarter job board.
Scotland runs its own system through SAAS; check saas.gov.uk for current rates.
Funding matched to this course
All Strathclyde funding →Scholarships & bursaries you could qualify for
Named awards published by the university. Compare the eligibility and application route before budgeting for one.
Faculty of Engineering International Scholarship15% reduction in tuition fees
self-funded, international (non-EU) undergraduate students beginning September 2026
Check eligibility →Amounts, exclusions and deadlines can change. An award is not guaranteed unless the university confirms it.
StudyKit · free
Still deciding what to study?
StudyKit brings course choice, applications and funding together in one place, with a personal AI assistant. Find what really fits you and start your UCAS application step by step.
Career quizApplication walkthroughSalary & CV check
Careers & earnings
What Engineering graduates actually earn, from real outcome data, 15 months, 3 years and 5 years after graduating.
Graduate earnings: this course
| When | Median | Typical range | Graduates |
|---|---|---|---|
| 15 months after | £32,500 | £30,000 – £35,500 | 85 |
| 3 years after | £34,500 | £29,500 – £40,500 | 200 |
| 5 years after | £42,500 | £36,000 – £53,000 | 210 |
Nominal earnings for graduates of this course/subject at this provider. Moderate evidence. Published sample: 85; avoid reading small differences as meaningful. Cohort 2022-23.
Graduate outcomes, 15 months on: this course
92%
in work or further study 15 months on
80%
in highly skilled work or study
100%
continue past their first year
77%
find their work meaningful
76%
say work fits their future plans
- 1Graduate roleFirst role after the degree · 0–2 yrs
- 2Specialist / PractitionerWorking in engineering · 2–5 yrs
- 3Senior / LeadLeading work and people · 5–10 yrs
- 4Head of / ExpertSenior leadership or deep expertise · 10+ yrs
How pay grows: this course vs Engineering nationally
Starting (15 months) HESA GO
£32,500
£29,000 – £35,000After 3 years LEO
£34,500
£26,775 – £37,800After 5 years LEO
£42,500
£33,150 – £46,800national rangethis course’s medianaxis £25,000 – £48,500
National figures for Engineering graduates, HESA Graduate Outcomes (15 months) and the Longitudinal Education Outcomes (LEO) dataset (3 & 5 years). These are national, not university-specific; actual pay varies by employer, region, role and experience. Different cohorts, so the bars are not one group over time.
Work out your pay
Headline figures hide a lot. Calculate realistic take-home pay for this field by role, region and experience, then check your CV before you apply.
What happened to 100 students?
Choose an outcome to translate the published percentage into a simple 100-person view. Each dot represents one percentage point, not an individual tracked student.
92 of 100
were in work or further study
15 months after graduation
90% working1% working and studying4% in further study80% in highly skilled work or study
Source: Discover Uni, using Graduate Outcomes and continuation data. Cohorts: 2022-23. Moderate evidence. Published sample: 85; avoid reading small differences as meaningful. Cohort 2022-23. Each tab is a separate published measure; categories can overlap and should not be added together.
Value compared with similar courses
How this course’s 5-year median earnings compare with Engineering courses at the same study level.
This course £42,500Peer median £38,500Middle 50% £35,500–£42,500
77th percentile
Compared with 2,256 courses with compatible official earnings data. This is a course-value comparison, not a quality ranking.
UK occupations graduates enter
Published graduate destinations, joined conservatively to UK SOC 2020, ONS pay and Skills England demand.
- Engineering professionalsSOC 2020 212 · 59% of published destinations · ASHE median £50,325
Discover Uni JOBLIST/JOBTYPE; ONS ASHE 2025 provisional, all employee jobs; Skills England Occupations in Demand 2025. SOC is shown only for an exact normalised label match; demand is shown only at exact four-digit SOC. Published sample: 100; response rate: 69%. Pay describes the occupation across workers, not a guaranteed graduate salary.
Job market & outlook
How Engineering graduates fare in the labour market, and how AI is reshaping the work.
90%
in work or further study 15 months after graduating, across Engineering courses nationally.
Graduate Outcomes80%
of working graduates are in highly skilled work or further study.
highly skilled88%
of students continue past their first year (still enrolled or completed).
continuationHow AI is changing the work
AI doesn't replace the profession, it shifts it: routine tasks get automated, while judgement, working with people and using AI well become more valuable.
What AI takes off your plate
- Routine information gathering
- First-draft writing and summaries
- Standard analysis and admin
- Repetitive processing tasks
More human than ever
- Judgement and original thinking
- Working with and leading people
- Owning and sense-checking AI output
- Ethics and accountability
The strongest graduates pair subject depth with the ability to use AI tools critically.
Roles & employers
Where Engineering graduates typically go, indicative destinations from graduate career data. Each role links to live openings on the StudySmarter job board.
Roles graduates go into
Where they work
- Engineering & manufacturing firms
- Automotive & aerospace
- Energy & utilities
- Defence & consultancies
Jobs after this course
Current roles from the StudySmarter job board that suit Engineering graduates.
Engineering Surveyor (Machine Control)BAM UK & IrelandEngineering Operations Project ManagerFdo Consulting LimitedEngineering ManagerVerto PeopleEngineering ManagerRobert WaltersEngineering ManagerPremier Technical RecruitmentEngineering ManagerRedline Group LtdLive from the StudySmarter job board · as of 2026-08-01.See all matching jobs
Is this course right for you?
The essentials UK applicants ask about: finance, outcomes, entry and quality.
💷
Student finance
Fees for this course are set under Scotland's own student-finance system, not the England cap; check the provider's course page for the exact figure. Tuition for eligible Scottish-domiciled students is paid by SAAS directly to the university, applied for through SAAS and not Student Finance England. Living-cost support is a mix of bursary and loan, and you repay only above the Scottish threshold.
📈
Where graduates go
92% were in work or further study 15 months after graduating, with a median salary of £32,500. See the full breakdown in Careers & earnings above.
🎯
Your entry chances
Use the UCAS points calculator above to see how your predicted grades compare with admitted students, and whether a contextual offer could apply.
⭐
Official-data snapshot
Averaging the official measures published for it, this course scores 9.0 out of 10: NSS 79% · in work or study 92% · continued 100%.
Who studies here and in this subject?
Provider- and UK subject-level context.
The University of Strathclyde
All students22,225
International18.8%
Aged 25+28.6%
Engineering and technology across the UK
Students176,530
Aged 25+23%
HESA student record 2024/25. Counts are rounded.
Is Engineering right for you?
Tick what applies to you and see how good a fit it is.
International students
What applying to Strathclyde from outside the UK involves: fees, English, visa, funding and living costs.
Tuition fees
International tuition is £30,950 / year for this course (from the provider’s fee page). You’re not eligible for UK Tuition Fee or Maintenance Loans, so plan for fees plus living costs upfront.
English language
Most UK undergraduate courses ask for around IELTS 6.0–6.5 (no band below 5.5–6.0), or an accepted equivalent. If you’re just short, most universities run a pre-sessional English course that counts towards the requirement.
Student visa
You’ll usually need a Student visa (Student Route). After you accept an offer the university issues a CAS; you then show funds for fees plus about £1,023–£1,334/month living costs and pay the Immigration Health Surcharge for NHS access.
Scholarships & funding
Strathclyde offers the Faculty of Engineering International Scholarship (15% reduction in tuition fees) for international students, see Scholarships above.
Living costs
Budget roughly £1,100–£1,400/month outside London and £1,400–£1,800/month in London for rent, food and travel; the figure also matters for your visa.
Working while you study
A Student visa usually allows up to 20 hours/week in term time and full-time in holidays, useful alongside study, though not something to rely on for fees.
Visa rules and fees change. Always confirm the current requirements with Strathclyde and gov.uk before you apply.
Related courses
More at Strathclyde
Common questions
How competitive is entry?
Entry is competitive. Accepted students typically held strong UCAS tariffs. The most common tariff band among recent entrants was More than 240 UCAS points. Use the calculator on this page to see where your predicted grades would put you; many universities also make lower contextual offers.
What are the entry requirements?
Set by Strathclyde. Most accepted students held A-levels or equivalent. Check the university's course page for the exact offer.
What do graduates go on to do?
For Mechanical engineering graduates from this provider, 92% were in work or further study 15 months after graduating, 80% in highly skilled roles, typical earnings around £32,500. (HESA Graduate Outcomes / LEO, via Discover Uni.)
What will it cost me?
Fees for this course are set under Scotland's own student-finance system, not the England cap; check the provider's course page for the exact figure. Tuition for eligible Scottish-domiciled students is paid by SAAS directly to the university, applied for through SAAS and not Student Finance England. Living-cost support is a mix of bursary and loan, and you repay only above the Scottish threshold. See Fees & funding on this page to work out your numbers.
No obligation
Request information about MEng (Hons) Electrical and Mechanical Engineering with International Study
Prospectus, key dates, entry and funding, free to your inbox.