BEng (Hons) Electronic Engineering Bachelor's degree at Southampton Solent University
BEng (Hons) Electronic Engineering at SSU. Electronic design lies at the heart of this IET-accredited course, preparing you to tackle real-world challenges in engineering.
About this course
With a strong focus on electronic design, this modern, IET-accredited electrical engineering course prepares you for an exciting career in the industry. From the provider’s course page.
BEng (Hons) Electronic Engineering is a Bachelor's degree (BEng (Hons)) at SSU, based in East Park Terrace. It runs 3 years, studied full-time.
For Engineering graduates from this provider, 90% were in work or further study 15 months after graduating, 75% in highly skilled roles, typical earnings around £30,000. (HESA Graduate Outcomes / LEO, via Discover Uni.)
For the typical curriculum, specialisations, career paths and graduate earnings for Engineering, see the sections below.
Course evidence score
The arithmetic mean of the official measures available for this course: NSS satisfaction, graduate activity and continuation.
Published threshold met NSS publication requires sufficient responses; small differences are not a rank. NSS mean of 7 published themes (Discover Uni snapshot 2026-06-21)
Limited evidence Published sample: 15; treat comparisons cautiously. Cohort 2022-23. Graduate Outcomes work or further study 90% (2022-23; Discover Uni snapshot 2026-06-21)
Published threshold met Discover Uni suppresses continuation data below its publication threshold. Cohort 2021-23. Continuation 75% (2021-23; Discover Uni snapshot 2026-06-21)
Curriculum & modules
Real modules published for this course, grouped only where the source gives a year, stage or level.
Year one 6 modules
- Applied MathematicsCore
Module details
On this module you will learn how to apply a range of mathematical techniques to realistic engineering problems. You will use basic algebra and solve simultaneous equations and equations of straight lines to answer engineering problems around linked variables in mechanics and electronics.
- Electronics PrinciplesCore
Module details
This module is designed to introduce you to the electrical and electronic principles necessary to analyse circuit behaviour and design. It also provides the foundation for further study of more specialised electrical/electronic engineering techniques used later in your course.
- Analogue and Digital ElectronicsCore
Module details
This module sits within the circuit theme and is designed to give you an introduction to the basic terminology, concepts and devices used in electronic circuits.
- Manufacturing PrinciplesCore
Module details
This module helps you to develop an awareness of the factors affecting the selection of materials and processes used in manufacturing a product. It does this by comparing the attributes of materials and the suitability of processes in the light of the external factors that need to be considered when developing the product design specification.
- Microprocessor SystemsCore
Module details
Almost all modern engineering systems contain microcomputer systems, which are especially important in the development of industry 4.0. This module is designed to introduce you to this area and develop your knowledge of the theory and practice of structured programming through high-level language.
- Professional Engineering SkillsCore
Module details
This module will introduce you to the profession of engineering. This includes both theoretical and professional skills relating to the role of the professional engineer and also supports your transition into higher education.
Year two 6 modules
- Applied Mathematics for ElectronicsCore
Module details
This module will equip you with the necessary mathematical knowledge and skill to critically evaluate and analyse electrical/electronic systems. It introduces key mathematical principles and methods, and examines circuit theory, in a way that reviews and extends the basic electrical and electronic principles that you will have encountered in FHEQ Level4.
- Electronic CircuitsCore
Module details
In this module you will develop your understanding of the use of circuit theorems and principles. You will also see how such circuits can be used to meet a variety of electronic requirements for practical applications.
- Embedded SystemsCore
Module details
This module aims to familiarise you with the whole development cycle of embedded systems. Initially, you will consider the design and implementation of combinational and sequential logic systems.
- Data Communications and NetworksCore
Module details
This module is part of the communications theme and providing you with an introduction to the fundamental concepts of networking theory, which is an integral part of most engineering and industry 4.0 systems.
- Automation and Control SystemsCore
Module details
This module provides theoretical and practical foundations in automation and control engineering. You will develop a comprehensive understanding of underpinning mathematical techniques including Laplace transforms, Fourier transforms, control stability theorems, differential equations, control block diagrams, and Bode plots.
- Competition and Contracts in EngineeringCore
Module details
This module will introduce you to the business subjects of marketing, competition and law, including the nature of contracts and ethical considerations. These are key areas for any engineering business – as such every technically focussed engineer should have a good working knowledge of these areas.
Final year 4 modules
- Electronic Circuit DesignCore
Module details
You will develop knowledge of the theory and use of active filters, including basic filter types (Butterworth, Bessel and Chebyshev), filter topology, first-order, second-order and third-order filters, active low-pass, high-pass, band-pass and band-stop filter stages.
- Digital Signal ProcessingCore
Module details
This module will consider the theoretical concepts and tools applicable to the analysis and design of discrete-time systems. This module discusses the concepts of sampling and the representation of discrete-time signals and systems.
- Radio SystemsCore
Module details
The module provides a framework for understanding and evaluating the key design topics and choices in developing radio systems. The module is designed to complement the data communications part of the communications theme and to give the student a structured overview of the wireless communications with emphasis on link design, performance trade-offs, key limiting factors and practical issues in implementation over real world channels.
- Final-Year ProjectCore
Module details
Carrying out project work is one of the most critical skills for your future career as an engineer. In this unit, you will carry out a project which is more significant in scale and complexity than previously. You will manage the project yourself.
Modules 2 modules
- Business StrategyOptional
Module details
In this module you will study these organisational constraints by examining the role, techniques and difficulties involved in strategic business management, along with the processes and strictures of formal strategic planning.
- EntrepreneurshipOptional
Module details
This module will provide you with the opportunity to explore and develop your entrepreneurial talents, which are important if you want to develop your own business or understand how businesses are developed. You will develop knowledge and skills around the legal and human resource aspects of setting up and running a successful business.
Source: provider course page. Modules can change; required/optional status, credits, descriptions and assessment are shown only when explicitly published.
Course in depth
What this course covers, who it suits and where it leads.
What you'll study
This modern, IET-accredited course focuses on electronic design and prepares you for a career in electrical engineering. You'll usually begin with engineering mathematics, mechanics and materials, and practical skills in CAD and workshop practice. In Year 2, the curriculum typically moves to the electrical stream, circuits, systems and engineering analysis, alongside a group design project tackled to industry standards. Year 3 emphasises specialist options such as robotics and mechatronics, energy and sustainability, or a Chartered (CEng) pathway, combined with professional engineering practice covering safety, ethics and project management. You'll conclude with a substantial individual design or research project.
Who it's for
You're drawn to electronics and enjoy problem-solving through design and experimentation. You have solid mathematics and physics foundations, and you're keen to move beyond theory into practical applications. You want a course that balances rigorous technical knowledge with real engineering practice. This programme suits those aiming for careers in electronic design, systems engineering or related technical roles, whether you're clear on your specialism now or want space to discover it as you study.
Careers & job market
Across engineering courses nationally, 90% of graduates are in work or further study within 15 months of graduating. Starting salaries typically sit between £29,000 and £35,000, rising to £26,775–£37,800 after three years and £33,150–£46,800 after five years; these figures are drawn from national graduate earnings data and reflect sector-wide trends rather than guarantees. Around 80% of working graduates occupy highly skilled positions or pursue further study. This course is recognised by the UK degree-awarding body framework and awarded Gold for teaching quality in the 2023 TEF assessment.
University & format
Southampton Solent University is a university located in East Park Terrace. The BEng (Hons) Electronic Engineering is a 3-year full-time degree taught in English. It is IET-accredited and recognised as a UK degree-awarding body; degrees are nationally recognised. The university holds a Gold award for teaching quality in the Office for Students' TEF 2023.
Student satisfaction
How students on this course answered the National Student Survey, by theme.
Share of students responding positively.
Published threshold met NSS publication requires sufficient responses; small differences are not a rank. NSS mean of 7 published themes (Discover Uni snapshot 2026-06-21)
Applicant information
The next application dates for this course, followed by facts the provider publishes.
- 2027 entryCompleted applications can be submitted
Your application needs a reference before you can send it.
- 2026 entryFinal date for 2026 applications
Applications must reach UCAS by 18:00 UK time.
- 2026 entryLast day to add a Clearing choice
Check that this course still has a vacancy before adding it.
- 2027 entryEqual-consideration deadline
18:00 UK time for most undergraduate courses.
Show 5 later dates
- 2027 entryUCAS Extra opens
Applicants who used all five choices and hold no offer may be able to add another choice.
- 2027 entryLast day applications go directly to providers
Applications received after 18:00 UK time are entered into Clearing.
- 2027 entryClearing opens
Eligible applicants can see vacancies and release themselves into Clearing.
- 2027 entryFinal date for 2027 applications
Applications must reach UCAS by 18:00 UK time.
- 2027 entryLast day to add a Clearing choice
Check that this course still has a vacancy before adding it.
Provider-published requirement; check the linked course page before applying.
The provider publishes contextual-offer information. Eligibility and any reduced offer are applicant-specific.
Names detected beside accreditation or recognition copy on the provider course page; verify the route and intake.
Placement year. Availability, selection and pay can vary.
See and book current events. Dates can fill or change.
Entry & how to get in
Who gets in
What recently admitted students actually held, official admissions data, not a stated requirement.
UCAS tariff of entrants
Grades are the A-level equivalent of each points band. Tap a band to check your own chances below.
Qualifications held on entry
| Qualification | Share |
|---|---|
| A-levels or equivalent | 65% |
| Other | 20% |
| another higher-education qualification | 5% |
| a Baccalaureate | 5% |
Entry & your chances
An honest read from the official entry data, plus your personal match.
Accepted students came in with a broad spread of qualifications and UCAS points. If you're worried about grades, this course has historically taken a wide range, and contextual offers may apply.
Will you get in? Plot your grades
Pick your predicted A-levels and watch your UCAS points land on the real spread of students admitted to this course.
Each bar is the share of admitted students in that UCAS-points band (lower → higher). Grades show the A-level equivalent.
Based on the official admitted-student tariff distribution. Many universities make contextual (reduced-grade) offers, so a result below the range doesn’t rule you out.
How to apply
Undergraduate applications go through UCAS. Here’s what matters for this course, the right deadline, the grades to aim for, and the steps in order.
- 1Register on UCAS Hub
Create your UCAS application and add this course (code H610). One application covers up to five choices.
- 2Write your personal statement
A single statement covers all your choices, so keep it broad enough for similar courses while showing genuine interest in this subject.
- 3Submit by 13 January 2027, 18:00 UK time
UCAS equal-consideration deadline for most undergraduate courses. Source: UCAS 2027 dates.
- 4Reply to your offers
When decisions are in, pick a firm (first) choice and an insurance (back-up) choice with slightly lower grades.
- 5Results day & confirmation
On results day (mid-August) your place is confirmed if you meet the offer. Just missed? Talk to the university, or find a place through Clearing.
Fees & funding
What this course costs and how UK student finance covers it.
Tuition per year
Provider fee page (England 2026/27 cap where not stated).
Check fees at SSU →For students who normally live in England
2026/27 Student Finance England figures. Maintenance support is means-tested and this two-point view is not an entitlement calculator. The course total uses its published length and home fee where both are available; a missing full-time fee uses the clearly labelled England-cap scenario, while part-time fees and unknown lengths are never guessed. Use the official calculator. Scotland, Wales and Northern Ireland use separate systems: SAAS, Student Finance Wales, and Student Finance NI.
Starting on or after 1 January 2027?
The Lifelong Learning Entitlement is a separate system. A new learner’s tuition entitlement is currently stated as £39,160 (about 480 credits at 2026/27 fee levels), subject to prior study and eligibility. Check the official LLE guide.
Paying for it
- Tuition Fee Loan: can cover eligible tuition up to the applicable limit and is paid straight to the provider.
- Maintenance Loan: up to £10,830/yr away from home outside London (England, 2026/27), means-tested on household income.
- Repayment: 9% of income above £25,000, nothing below it; written off after 40 years.
- Earn alongside: most students work part-time in term, part-time roles on the StudySmarter job board.
England figures shown; Scotland, Wales & NI run their own schemes, check gov.uk.
Scholarships & bursaries you could qualify for
That does not mean no funding exists. Check the university directory for current amounts, eligibility and application dates.
We only display a named award when its provider source identifies the award and who it is for.
Still deciding what to study?
StudyKit brings course choice, applications and funding together in one place, with a personal AI assistant. Find what really fits you and start your UCAS application step by step.
Careers & earnings
What Engineering graduates actually earn, from real outcome data, 15 months, 3 years and 5 years after graduating.
Graduate earnings: this course
| When | Median | Typical range | Graduates |
|---|---|---|---|
| 15 months after | £30,000 | £27,500 – £32,000 | 15 |
| 3 years after | £25,000 | £18,500 – £31,500 | 100 |
| 5 years after | £31,500 | £23,500 – £39,000 | 100 |
Nominal earnings for graduates of this course/subject at this provider. Limited evidence. Published sample: 15; treat comparisons cautiously. Cohort 2022-23.
Graduate outcomes, 15 months on: this course
- 1Graduate roleFirst role after the degree · 0–2 yrs
- 2Specialist / PractitionerWorking in engineering · 2–5 yrs
- 3Senior / LeadLeading work and people · 5–10 yrs
- 4Head of / ExpertSenior leadership or deep expertise · 10+ yrs
How pay grows: this course vs Engineering nationally
National figures for Engineering graduates, HESA Graduate Outcomes (15 months) and the Longitudinal Education Outcomes (LEO) dataset (3 & 5 years). These are national, not university-specific; actual pay varies by employer, region, role and experience. Different cohorts, so the bars are not one group over time.
Work out your pay
Headline figures hide a lot. Calculate realistic take-home pay for this field by role, region and experience, then check your CV before you apply.
What happened to 100 students?
Choose an outcome to translate the published percentage into a simple 100-person view. Each dot represents one percentage point, not an individual tracked student.
were in work or further study
15 months after graduation
Source: Discover Uni, using Graduate Outcomes and continuation data. Cohorts: 2022-23. Limited evidence. Published sample: 15; treat comparisons cautiously. Cohort 2022-23. Each tab is a separate published measure; categories can overlap and should not be added together.
Value compared with similar courses
How this course’s 5-year median earnings compare with Engineering courses at the same study level.
Compared with 2,256 courses with compatible official earnings data. This is a course-value comparison, not a quality ranking.
UK occupations graduates enter
Published graduate destinations, joined conservatively to UK SOC 2020, ONS pay and Skills England demand.
- Engineering professionalsSOC 2020 212 · 60% of published destinations · ASHE median £50,325
- Skilled trades occupationsSOC 2020 5 · 10% of published destinations · ASHE median £34,241
Discover Uni JOBLIST/JOBTYPE; ONS ASHE 2025 provisional, all employee jobs; Skills England Occupations in Demand 2025. SOC is shown only for an exact normalised label match; demand is shown only at exact four-digit SOC. Published sample: 30; response rate: 75%. Pay describes the occupation across workers, not a guaranteed graduate salary.
Job market & outlook
How Engineering graduates fare in the labour market, and how AI is reshaping the work.
How AI is changing the work
AI doesn't replace the profession, it shifts it: routine tasks get automated, while judgement, working with people and using AI well become more valuable.
What AI takes off your plate
- Routine information gathering
- First-draft writing and summaries
- Standard analysis and admin
- Repetitive processing tasks
More human than ever
- Judgement and original thinking
- Working with and leading people
- Owning and sense-checking AI output
- Ethics and accountability
The strongest graduates pair subject depth with the ability to use AI tools critically.
Roles & employers
Where Engineering graduates typically go, indicative destinations from graduate career data. Each role links to live openings on the StudySmarter job board.
Roles graduates go into
Where they work
- Engineering & manufacturing firms
- Automotive & aerospace
- Energy & utilities
- Defence & consultancies
Jobs after this course
Current roles from the StudySmarter job board that suit Engineering graduates.
Is this course right for you?
The essentials UK applicants ask about: finance, outcomes, entry and quality.
Student finance
For comparison, the standard full-time England tuition cap is up to £9,790 per year in 2026/27; the actual fee varies by course and provider. If you normally live in England, eligible students can apply for a Tuition Fee Loan, plus a Maintenance Loan for living costs. Under Plan 5 you repay 9% of income above £25,000, nothing below that, and the balance is written off after 40 years.
Where graduates go
90% were in work or further study 15 months after graduating, with a median salary of £30,000. See the full breakdown in Careers & earnings above.
Your entry chances
Use the UCAS points calculator above to see how your predicted grades compare with admitted students, and whether a contextual offer could apply.
Official-data snapshot
Averaging the official measures published for it, this course scores 7.9 out of 10: NSS 71% · in work or study 90% · continued 75%.
Who studies here and in this subject?
Provider- and UK subject-level context.
Southampton Solent University
Engineering and technology across the UK
HESA student record 2024/25. Counts are rounded.
Local crime-data context
A neutral snapshot around the published teaching location.
Around East Park Terrace
3,609 street-level reports returned within roughly one mile across 2026-04 to 2026-06.
Police.uk street-level API. Approximate locations, not confined to campus. England, Wales and Northern Ireland; not Scotland.
Is Engineering right for you?
Tick what applies to you and see how good a fit it is.
International students
What applying to SSU from outside the UK involves: fees, English, visa, funding and living costs.
Tuition fees
International tuition is £30,000 / year for this course (from the provider’s fee page). You’re not eligible for UK Tuition Fee or Maintenance Loans, so plan for fees plus living costs upfront.
English language
Most UK undergraduate courses ask for around IELTS 6.0–6.5 (no band below 5.5–6.0), or an accepted equivalent. If you’re just short, most universities run a pre-sessional English course that counts towards the requirement.
Student visa
You’ll usually need a Student visa (Student Route). After you accept an offer the university issues a CAS; you then show funds for fees plus about £1,023–£1,334/month living costs and pay the Immigration Health Surcharge for NHS access.
Scholarships & funding
Many universities offer international/global scholarships (often £2,000–£6,000/yr), check SSU’s funding pages.
Living costs
Budget roughly £1,100–£1,400/month outside London and £1,400–£1,800/month in London for rent, food and travel; the figure also matters for your visa.
Working while you study
A Student visa usually allows up to 20 hours/week in term time and full-time in holidays, useful alongside study, though not something to rely on for fees.
Visa rules and fees change. Always confirm the current requirements with SSU and gov.uk before you apply.
Related courses
More at SSU
Common questions
How competitive is entry?
What are the entry requirements?
What do graduates go on to do?
What will it cost me?
Request information about BEng (Hons) Electronic Engineering
Prospectus, key dates, entry and funding, free to your inbox.


