BEng (Hons) Electronic and Computer Engineering Bachelor's degree at the University of Kent
BEng (Hons) Electronic and Computer Engineering at University of Kent covers core theory, research and methods, applied practice, specialist options, an independent project, and professional skills.
About this course
Combine electronics and computing with a BEng (Hons) in Electronic and Computer Engineering including a Foundation Year at the University of Kent. Develop expertise in circuit design, embedded systems, and programming, preparing for a career in tech, engineering, and innovation. Apply now! From the provider’s course page.
BEng (Hons) Electronic and Computer Engineering is a Bachelor's degree (BEng (Hons)) at the University of Kent, based in Canterbury. It runs 4 years, studied full-time.
For Electrical and electronic engineering graduates from this provider, 95% were in work or further study 15 months after graduating, 65% in highly skilled roles, typical earnings around £32,000. (HESA Graduate Outcomes / LEO, via Discover Uni.)
For the typical curriculum, specialisations, career paths and graduate earnings for Engineering, see the sections below.
Course evidence score
The arithmetic mean of the official measures available for this course: NSS satisfaction, graduate activity and continuation.
Published threshold met NSS publication requires sufficient responses; small differences are not a rank. NSS mean of 7 published themes (Discover Uni snapshot 2026-06-21)
Moderate evidence Published sample: 30; avoid reading small differences as meaningful. Cohort 2022-23. Graduate Outcomes work or further study 95% (2022-23; Discover Uni snapshot 2026-06-21)
Published threshold met Discover Uni suppresses continuation data below its publication threshold. Cohort 2022-23. Continuation 75% (2022-23; Discover Uni snapshot 2026-06-21)
Curriculum & modules
Real modules published for this course, grouped only where the source gives a year, stage or level.
Foundation 6 modules
- Foundation Skills for Engineering, Mathematics and PhysicsCompulsory
Module details
You will develop critical thinking and problem solving skills required to underpin your studies as well as beginning to gain knowledge to enable you to start using measurement instruments, understand forces, and fundamental electric circuits. Your ability to work with results including measurement errors as well as report writing skills will also be developed to support you throughout the degree and your professional life.
- Foundation Algebra and GeometryCompulsory
Module details
A solid grasp of algebra and geometry is a fundamental requirement for advanced study in any STEM subject. In this module, you will study foundational algebra and coordinate geometry required for Stage 1 entry into your chosen degree. Topics in algebra include law of indices, surds, and factoring. In geometry you will learn the essential rules of trigonometry, angles, and straight line geometry, In addition you will learn how to reason with logarithms, exponentials and gain skills in solving equ
- Foundation Statistics and Programming to Explore Your SubjectCompulsory
Module details
A solid grasp of statistics and programming are both essential for modern mathematicians and scientists, in both academic study and the workplace. You'll learn the basics of probability, statistics, and hypothesis testing necessary for advanced study. In particular, you'll gain skills in using measures of central tendency such as the mean, median, and mode, and measures of dispersion such as the range, variance, and standard deviation. You'll learn how to use quartiles and percentiles, and to in
- Foundation Mechanics and MaterialsCompulsory
Module details
Learn about the interplay of the core concepts physicists and engineers use to describe the behaviour of objects in the world around us. Establish the relevant quantities, units and dimensions giving you the tools to understand mechanics and materials. Learn about characterising the motion of objects through distance, velocity and acceleration with time graphs. You will examine the behaviours of forces through Newtons' Laws and the relationship between those forces and work, power and energy. Yo
- Foundation Functions and CalculusCompulsory
Module details
Calculus – the study of continuous change – is a pillar of advanced mathematics, with important applications in STEM and Financial subjects. Calculus and in particular differential equations are central to real life applications of mathematics in a wide variety of subject areas, ranging from Physics and Engineering to Biology and Finance. In this module, you will develop your knowledge of mathematical functions to give you a solid foundation with which to grasp calculus and other advanced topics
- Foundation Waves, Vibrations and ElectromagneticsCompulsory
Module details
The principles of matter, waves and vibrations are important underpinning topics in physics and engineering supporting applications as diverse as quantum materials, medical imaging, data communications and astronomical observations. To prepare you for future study in your chosen degree, you will learn to analyse physical waves, vibrations, alternating current and electromagnetic waves. You will also gain awareness of the principles of electrostatics and magnetism, as well as being introduced to
Stage 1 6 modules
- Mathematics for EngineeringCompulsory
Module details
Mathematics is the fundamental language of engineering, allowing complex ideas to be described, formulated and developed. This module gives you a strong foundation of key mathematical techniques and methods required by most other modules in our engineering courses. Topics covered include complex numbers, calculus, linear algebra, statistics and probability. Throughout the module, you'll tackle real-world engineering problems. These include the study of mechanical and electrical systems, the use
- Electronics For EngineersCompulsory
Module details
Electronics underpins all of modern life, from everyday household items to the most sophisticated supercomputers. It enables devices such as ultra-low power wearable health monitors through to megawatt wind turbines. You'll begin your engineering journey by learning fundamental circuit analysis and fabrication skills. This will enable you to begin engineering project work right from your first year. You'll also explore the vital and trusted role that engineers play in supporting and transforming
- Fundamentals of ProgrammingCompulsory
Module details
Programming underpins all facets of modern life, from basic software applications to complex artificial intelligence systems. It enables everything from simple mobile apps to large-scale enterprise solutions. You'll embark on your programming journey here, mastering fundamental coding concepts and development skills. This foundation will empower you to dive into programming projects right from your first year through lectures, workshops and programming challenges. You'll also examine the pivotal
- Engineering Materials and DesignCompulsory
Module details
The success of an engineering product relies on the combination of careful mechanical design, strategic material selection, and a deep understanding of mechanics. These elements collectively shape the product's performance, durability, and overall effectiveness, highlighting their essential role in the development of any successful engineering solution. You'll learn how to develop an engineering drawing of a product using a Computer-Aided Design (CAD) system and choose the best materials from a
- Design and Prototyping ProjectCompulsory
Module details
To bring your engineering education to life, you'll do a project in each year of study. In the Stage 1 project, you'll gain hands-on experience, allowing you to apply theoretical knowledge to real-world problems. It will enhance your understanding of engineering principles and concepts. Throughout this process, you'll apply electronic and mechanical design skills and programming/software knowledge to describe and produce a physical solution alongside a technical specification. You are expected t
- Electronic CircuitsCompulsory
Module details
Electronic Engineers need a knowledge of both analogue and digital electronic circuits and electronic devices to effectively design future products. This module introduces you to analysis and design techniques and electronic component properties. You'll learn using circuit analysis software, commonly used in industry and practical work using industrial standard measurement equipment.
Stage 2 1 modules
- Mechatronics and MeasurementsCompulsory
Module details
Engineers work in interdisciplinary teams to overcome the challenges of intelligent engineering systems. Smart engineering systems are not simple mechanical or electronic components, but the result of synergistic integration between m
Source: provider course page. Modules can change; required/optional status, credits, descriptions and assessment are shown only when explicitly published.
Course in depth
What this course covers, who it suits and where it leads.
What you'll study
This degree combines electronics and computing with practical circuit design, embedded systems, and programming skills. You'll usually start with engineering mathematics, mechanics and materials, and design fundamentals in Year 1. Year 2 moves into discipline core modules, circuits, systems and engineering analysis, alongside computing and a group design project working to a real specification. In Years 3 and 4, you'll choose from specialisations such as electrical and electronic engineering, robotics and mechatronics, energy and sustainability, and the chartered (CEng) pathway. Throughout, you'll develop expertise through individual projects, culminating in a substantial supervised design or research project in your final year. The course also covers professional engineering practice, including safety, ethics, sustainability and project management.
Who it's for
This course suits students with A-level qualifications or equivalent. Most accepted students (98%) entered with A-levels or equivalent; the typical UCAS tariff band among recent entrants was 80–95 points.
Careers & job market
Across engineering courses nationally, 90% of graduates are in work or further study within 15 months. Of those working, 80% are in highly skilled roles or further study. National graduate earnings data shows starting salaries of £29,000–£35,000 at 15 months; after three years, £26,775–£37,800; and after five years, £33,150–£46,800. These figures reflect national outcomes, not university-specific guarantees. Retention is strong: 88% of students continue past their first year.
University & format
The BEng (Hons) Electronic and Computer Engineering is a full-time, 4-year degree taught in English at the University of Kent, a public university in Canterbury. You'll graduate with a nationally recognised Bachelor's degree and UCAS code H694. The University is recognised as a UK degree-awarding body and holds Silver status for teaching quality in the Office for Students' TEF 2023.
Student satisfaction
How students on this course answered the National Student Survey, by theme.
Share of students responding positively.
Published threshold met NSS publication requires sufficient responses; small differences are not a rank. NSS mean of 7 published themes (Discover Uni snapshot 2026-06-21)
Applicant information
The next application dates for this course, followed by facts the provider publishes.
- 2027 entryCompleted applications can be submitted
Your application needs a reference before you can send it.
- 2026 entryFinal date for 2026 applications
Applications must reach UCAS by 18:00 UK time.
- 2026 entryLast day to add a Clearing choice
Check that this course still has a vacancy before adding it.
- 2027 entryEqual-consideration deadline
18:00 UK time for most undergraduate courses.
Show 5 later dates
- 2027 entryUCAS Extra opens
Applicants who used all five choices and hold no offer may be able to add another choice.
- 2027 entryLast day applications go directly to providers
Applications received after 18:00 UK time are entered into Clearing.
- 2027 entryClearing opens
Eligible applicants can see vacancies and release themselves into Clearing.
- 2027 entryFinal date for 2027 applications
Applications must reach UCAS by 18:00 UK time.
- 2027 entryLast day to add a Clearing choice
Check that this course still has a vacancy before adding it.
Provider-published requirement; check the linked course page before applying.
Names detected beside accreditation or recognition copy on the provider course page; verify the route and intake.
Year in industry. Availability, selection and pay can vary.
Entry & how to get in
Who gets in
What recently admitted students actually held, official admissions data, not a stated requirement.
UCAS tariff of entrants
Grades are the A-level equivalent of each points band. Tap a band to check your own chances below.
Qualifications held on entry
| Qualification | Share |
|---|---|
| A-levels or equivalent | 98% |
| a Baccalaureate | 2% |
Entry & your chances
An honest read from the official entry data, plus your personal match.
Accepted students came in with a broad spread of qualifications and UCAS points. If you're worried about grades, this course has historically taken a wide range, and contextual offers may apply.
Will you get in? Plot your grades
Pick your predicted A-levels and watch your UCAS points land on the real spread of students admitted to this course.
Each bar is the share of admitted students in that UCAS-points band (lower → higher). Grades show the A-level equivalent.
Based on the official admitted-student tariff distribution. Many universities make contextual (reduced-grade) offers, so a result below the range doesn’t rule you out.
How to apply
Undergraduate applications go through UCAS. Here’s what matters for this course, the right deadline, the grades to aim for, and the steps in order.
- 1Register on UCAS Hub
Create your UCAS application and add this course (code H694). One application covers up to five choices.
- 2Write your personal statement
A single statement covers all your choices, so keep it broad enough for similar courses while showing genuine interest in this subject.
- 3Submit by 13 January 2027, 18:00 UK time
UCAS equal-consideration deadline for most undergraduate courses. Source: UCAS 2027 dates.
- 4Reply to your offers
When decisions are in, pick a firm (first) choice and an insurance (back-up) choice with slightly lower grades.
- 5Results day & confirmation
On results day (mid-August) your place is confirmed if you meet the offer. Just missed? Talk to the university, or find a place through Clearing.
Fees & funding
What this course costs and how UK student finance covers it.
Tuition per year
Provider fee page (England 2026/27 cap where not stated).
Check fees at University of Kent →For students who normally live in England
2026/27 Student Finance England figures. Maintenance support is means-tested and this two-point view is not an entitlement calculator. The course total uses its published length and home fee where both are available; a missing full-time fee uses the clearly labelled England-cap scenario, while part-time fees and unknown lengths are never guessed. Use the official calculator. Scotland, Wales and Northern Ireland use separate systems: SAAS, Student Finance Wales, and Student Finance NI.
Starting on or after 1 January 2027?
The Lifelong Learning Entitlement is a separate system. A new learner’s tuition entitlement is currently stated as £39,160 (about 480 credits at 2026/27 fee levels), subject to prior study and eligibility. Check the official LLE guide.
Paying for it
- Tuition Fee Loan: can cover eligible tuition up to the applicable limit and is paid straight to the provider.
- Maintenance Loan: up to £10,830/yr away from home outside London (England, 2026/27), means-tested on household income.
- Repayment: 9% of income above £25,000, nothing below it; written off after 40 years.
- Earn alongside: most students work part-time in term, part-time roles on the StudySmarter job board.
England figures shown; Scotland, Wales & NI run their own schemes, check gov.uk.
Scholarships & bursaries you could qualify for
That does not mean no funding exists. Check the university directory for current amounts, eligibility and application dates.
We only display a named award when its provider source identifies the award and who it is for.
Still deciding what to study?
StudyKit brings course choice, applications and funding together in one place, with a personal AI assistant. Find what really fits you and start your UCAS application step by step.
Careers & earnings
What Engineering graduates actually earn, from real outcome data, 15 months, 3 years and 5 years after graduating.
Graduate earnings: this course
| When | Median | Typical range | Graduates |
|---|---|---|---|
| 15 months after | £32,000 | £29,000 – £35,000 | 30 |
| 3 years after | £35,000 | £29,000 – £40,500 | 80 |
| 5 years after | £43,500 | £33,500 – £55,500 | 80 |
Nominal earnings for graduates of this course/subject at this provider. Moderate evidence. Published sample: 30; avoid reading small differences as meaningful. Cohort 2022-23.
Graduate outcomes, 15 months on: this course
- 1Graduate roleFirst role after the degree · 0–2 yrs
- 2Specialist / PractitionerWorking in engineering · 2–5 yrs
- 3Senior / LeadLeading work and people · 5–10 yrs
- 4Head of / ExpertSenior leadership or deep expertise · 10+ yrs
How pay grows: this course vs Engineering nationally
National figures for Engineering graduates, HESA Graduate Outcomes (15 months) and the Longitudinal Education Outcomes (LEO) dataset (3 & 5 years). These are national, not university-specific; actual pay varies by employer, region, role and experience. Different cohorts, so the bars are not one group over time.
Work out your pay
Headline figures hide a lot. Calculate realistic take-home pay for this field by role, region and experience, then check your CV before you apply.
What happened to 100 students?
Choose an outcome to translate the published percentage into a simple 100-person view. Each dot represents one percentage point, not an individual tracked student.
were in work or further study
15 months after graduation
Source: Discover Uni, using Graduate Outcomes and continuation data. Cohorts: 2022-23. Moderate evidence. Published sample: 30; avoid reading small differences as meaningful. Cohort 2022-23. Each tab is a separate published measure; categories can overlap and should not be added together.
Value compared with similar courses
How this course’s 5-year median earnings compare with Engineering courses at the same study level.
Compared with 2,256 courses with compatible official earnings data. This is a course-value comparison, not a quality ranking.
UK occupations graduates enter
Published graduate destinations, joined conservatively to UK SOC 2020, ONS pay and Skills England demand.
- Engineering professionalsSOC 2020 212 · 35% of published destinations · ASHE median £50,325
- Information Technology ProfessionalsSOC 2020 213 · 30% of published destinations · ASHE median £55,357
- Elementary occupationsSOC 2020 9 · 10% of published destinations · ASHE median £19,087
Discover Uni JOBLIST/JOBTYPE; ONS ASHE 2025 provisional, all employee jobs; Skills England Occupations in Demand 2025. SOC is shown only for an exact normalised label match; demand is shown only at exact four-digit SOC. Published sample: 30; response rate: 55%. Pay describes the occupation across workers, not a guaranteed graduate salary.
Is BEng (Hons) Electronic and Computer Engineering worth it?
Generally yes. On its graduates’ median earnings, BEng (Hons) Electronic and Computer Engineering is worth about +£155,840 more over the first ten years of work than going straight to a job, a solid return once you net out the fees.
Cumulative earnings vs. going straight to work at 18, counting tuition and 4 years of wages given up while studying. The line clears zero around year 11.4. This is a simplified gross-earnings comparison, not a forecast of cash loan repayments.
Model: this course’s own median graduate earnings (Graduate Outcomes / LEO) above the £24,000 non-graduate baseline (ONS), net of £9,790/yr over 4 years (published course home fee). Eligible England-domiciled students can apply for a Tuition Fee Loan; repayments are 9% only on income above the threshold, with anything left written off after 40 years. That makes the cash flow different from conventional commercial debt. Opportunity cost assumes £18,000 gross earnings forgone in each study year; figures are nominal and exclude tax, living costs, investment returns and loan interest. A simplified estimate. Earnings and actual fees vary by graduate, provider, fee status and UK nation.
Job market & outlook
How Engineering graduates fare in the labour market, and how AI is reshaping the work.
How AI is changing the work
AI doesn't replace the profession, it shifts it: routine tasks get automated, while judgement, working with people and using AI well become more valuable.
What AI takes off your plate
- Routine information gathering
- First-draft writing and summaries
- Standard analysis and admin
- Repetitive processing tasks
More human than ever
- Judgement and original thinking
- Working with and leading people
- Owning and sense-checking AI output
- Ethics and accountability
The strongest graduates pair subject depth with the ability to use AI tools critically.
Roles & employers
Where Engineering graduates typically go, indicative destinations from graduate career data. Each role links to live openings on the StudySmarter job board.
Roles graduates go into
Where they work
- Engineering & manufacturing firms
- Automotive & aerospace
- Energy & utilities
- Defence & consultancies
Jobs after this course
Current roles from the StudySmarter job board that suit Engineering graduates.
Engineering Surveyor (Machine Control)BAM UK & IrelandEngineering Operations Project ManagerFdo Consulting LimitedEngineering ManagerVerto PeopleEngineering ManagerRobert WaltersEngineering ManagerPremier Technical RecruitmentEngineering ManagerRedline Group LtdIs this course right for you?
The essentials UK applicants ask about: finance, outcomes, entry and quality.
Student finance
Published home tuition is £9,790/year for this course. If you normally live in England, eligible students can apply for a Tuition Fee Loan, plus a Maintenance Loan for living costs. Under Plan 5 you repay 9% of income above £25,000, nothing below that, and the balance is written off after 40 years.
Where graduates go
95% were in work or further study 15 months after graduating, with a median salary of £32,000. See the full breakdown in Careers & earnings above.
Your entry chances
Use the UCAS points calculator above to see how your predicted grades compare with admitted students, and whether a contextual offer could apply.
Official-data snapshot
Averaging the official measures published for it, this course scores 8.3 out of 10: NSS 79.3% · in work or study 95% · continued 75%.
Who studies here and in this subject?
Provider- and UK subject-level context.
The University of Kent
Engineering and technology across the UK
HESA student record 2024/25. Counts are rounded.
Local crime-data context
A neutral snapshot around the published teaching location.
Around Canterbury
318 street-level reports returned within roughly one mile across 2026-04 to 2026-06.
Police.uk street-level API. Approximate locations, not confined to campus. England, Wales and Northern Ireland; not Scotland.
Is Engineering right for you?
Tick what applies to you and see how good a fit it is.
International students
What applying to University of Kent from outside the UK involves: fees, English, visa, funding and living costs.
Tuition fees
International tuition is £23,500 / year for this course (from the provider’s fee page). You’re not eligible for UK Tuition Fee or Maintenance Loans, so plan for fees plus living costs upfront.
English language
Most UK undergraduate courses ask for around IELTS 6.0–6.5 (no band below 5.5–6.0), or an accepted equivalent. If you’re just short, most universities run a pre-sessional English course that counts towards the requirement.
Student visa
You’ll usually need a Student visa (Student Route). After you accept an offer the university issues a CAS; you then show funds for fees plus about £1,023–£1,334/month living costs and pay the Immigration Health Surcharge for NHS access.
Scholarships & funding
Many universities offer international/global scholarships (often £2,000–£6,000/yr), check University of Kent’s funding pages.
Living costs
Budget roughly £1,100–£1,400/month outside London and £1,400–£1,800/month in London for rent, food and travel; the figure also matters for your visa.
Working while you study
A Student visa usually allows up to 20 hours/week in term time and full-time in holidays, useful alongside study, though not something to rely on for fees.
Visa rules and fees change. Always confirm the current requirements with University of Kent and gov.uk before you apply.
Related courses
More at University of Kent
BEng (Hons) Biomedical Engineering including a Foundation YearBEng (Hons) · University of KentBEng (Hons) Biomedical Engineering with a Year in IndustryBEng (Hons) · University of KentBEng (Hons) Biomedical EngineeringBEng (Hons) · University of KentBEng (Hons) Electronic and Computer EngineeringBEng (Hons) · University of Kent
Common questions
How competitive is entry?
What are the entry requirements?
What do graduates go on to do?
What will it cost me?
Request information about BEng (Hons) Electronic and Computer Engineering
Prospectus, key dates, entry and funding, free to your inbox.